LPSW400
DN500, 20″Machine with Long Distance Control System, Our remaining purpose is “To check out the very best, To become the Best”. Make sure you come to feel free to call with us for those who have any necessities.
Ábhar an Phíopa SheachtraighChina Water Filling Machine, Machine3.2.1 Cineál Nasc Báinéit Folúis le Teanntáin
samhail
Ceangal
Cineál
Trastomhas Ainmniúil an Phíopa Istigh
Brú Dearaidh
Ábhar
den Phíopa Istigh
Caighdeánach
| VNóta | Cruach Dhosmálta Sraith 300 |
| |
| DN15, 1/2″ | DN10, 3/8″ | 8 mbarra | Molta ≤ DN25 nó 1″. Nó roghnaítear Cineál Nasc Báinéit Folúis le Flanges agus Boltaí (ó DN10, 3/8″ go DN80, 3″), Cineál Nasc Táthaithe VIP (ó DN10, 3/8″ go DN500, 20″) |
| ASME B31.3 | Is é B 304L, | ||
| Is é C 316, | No | No | Is é D 316L, |
| Nominal Diameter of Inner Pipe | HLPD | B01508 | DN15, 1/2″ |
| Design Pressure | B02008 | DN20, 3/4″ | HLPD |
| B02508 | Trastomhas Ainmniúil an Phíopa Istigh: | Trastomhas Ainmniúil an Phíopa Istigh: | Molta ≤ DN25 nó 1″. Nó roghnaítear Cineál Nasc Báinéit Folúis le Flanges agus Boltaí (ó DN10, 3/8″ go DN80, 3″), Cineál Nasc Táthaithe VIP (ó DN10, 3/8″ go DN500, 20″) |
| Trastomhas Ainmniúil an Phíopa Sheachtraigh: | Molta ag Caighdeán Fiontraíochta HL maidir le Trealamh Crióigineach. Is féidir é a tháirgeadh freisin de réir riachtanais an chustaiméara. | ||
| Brú Dearaidh: | Molta ≤ 8 bar. Nó roghnaítear Cineál Nasc Báinéit Folúis le Flanges agus Boltaí (≤16 bar), Cineál Nasc Táthaithe (≤64 bar) | ||
| Material | Urdu | ||
| Coinníoll Cumhachta: | LN2Caithfidh an suíomh cumhacht a sholáthar do na caidéil folúis agus faisnéis leictreachais áitiúil (Voltas agus Heirts) a chur in iúl do HL Cryogenic Equipment.23.2.2 Cineál Nasc Báinéit Folúis le Flanges agus Boltaí | ||
samhail
Ceangal
Cineál
Trastomhas Ainmniúil an Phíopa Istigh
| Brú Dearaidh | Ábhar | |
| den Phíopa Istigh | Caighdeánach | Nóta |
| HLP | DF010 | 00X |
| Cineál Nasc Báinéite Folúis le Flanges agus Boltaí le haghaidh Córas Píopaí Inslithe Folúis Statach | Ábhar an Phíopa Istigh. | Ábhar an Phíopa Istigh. |
| Cruach Dhosmálta Sraith 300 | Ábhar an Phíopa Istigh. | Ábhar an Phíopa Istigh. |
| Ábhar an Phíopa Istigh. | Ábhar an Phíopa Istigh. |
Is é A 304,
Is é B 304L,
Is é C 316,
Is é D 316L,
Is é E an ceann eile.
HLPD
F015
00X
DN15, 1/2″
HLPD
F020
00X
Nominal Diameter of Inner Pipe
HLPD
DN25, 1″
00X
DN25, 1″
HLPD
Design Pressure
00X
DN32, 1-1/4″
HLPD
F040
00X
DN40, 1-1/2″
HLPD
F050
00X
DN50, 2″
HLPD
F065
00X
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| +86 18090111643Molta ≤ 16 bar. Nó roghnaítear Cineál Nasc Táthaithe (≤64 bar).X | Eabhrais | DN10, 3/8″ | Ungáiris
| Urdu | ASME B31.3 | X:Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| +86 18090111643LaitvisX | DN15, 1/2″ | |||||
| +86 18090111643MacadóinisX | DN20, 3/4″ | |||||
| +86 18090111643MailéalaimisX | DN25, 1″ |
Nominal Diameter of Inner Pipe:Maratí
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Ioruais
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Is é B 304L,
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| +86 18090111643DN20, 3/4″00X | Teileagúis | DN10, 3/8″ | Úcránach | Urdu | ASME B31.3 | 00: 00X 08 is 8bar, Xósa
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| +86 18090111643Úigiúrach00X | DN15, 1/2″ | |||||
| +86 18090111643F02000X | DN20, 3/4″ | |||||
| +86 18090111643F02500X | DN25, 1″ | |||||
| +86 18090111643F03200X | DN32, 1-1/4″ | |||||
| +86 18090111643F04000X | DN40, 1-1/2″ | |||||
| +86 18090111643F05000X | DN50, 2″ | |||||
| +86 18090111643F06500X | DN65, 2-1/2″ | |||||
| +86 18090111643F08000X | DN80, 3″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3″. Or selects the Welded Connection Type (from DN10, 3/8″ to DN500, 20″), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8″ to DN25, 1″).
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: DN500, 20″
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Ábhar an Phíopa Sheachtraigh
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| +86 18090111643Ar Aghaidh:00X | Meaisín Líonta Uisce na Síne | DN10, 3/8″ | 8~64 bar | Urdu | ASME B31.3 | 00: Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40, 64.
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| +86 18090111643Déan Teagmháil Linn00X | DN15, 1/2″ | |||||
| +86 18090111643Sraith Píopa Inslithe Folúis00X | DN20, 3/4″ | |||||
| +86 18090111643Sraith Deighilteoir Céime Inslithe i bhFolús00X | DN25, 1″ | |||||
| +86 18090111643W03200X | DN32, 1-1/4″ | |||||
| +86 18090111643W04000X | DN40, 1-1/2″ | |||||
| +86 18090111643W05000X | DN50, 2″ | |||||
| +86 18090111643W06500X | DN65, 2-1/2″ | |||||
| +86 18090111643W08000X | DN80, 3″ | |||||
| HFraincis00X | DN100, 4″ | |||||
| HSpáinnis00X | DN125, 5″ | |||||
| HCóiréach00X | DN150, 6″ | |||||
| HGréigis00X | DN200, 8″ | |||||
| HDanmhairgis00X | DN250, 10″ | |||||
| HSeiceach00X | DN300, 12″ | |||||
| HPolainnis00X | DN350, 14″ | |||||
| HEsperanto00X | DN400, 16″ | |||||
| HAlbáinis00X | DN450, 18″ | |||||
| HAsarbaiseáinis00X | DN500, 20″ |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Corsaiceach
Cróitis
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLPHaváísX | Eabhrais | DN10, 3/8″ | Ungáiris | Urdu | ASME B31.3 | X:Iávais B is 304L, C is 316, D is 316L, E is other. |
| HLPDLaitvisX | DN15, 1/2″ | |||||
| HLPDMacadóinisX | DN20, 3/4″ | |||||
| HLPDMailéalaimisX | DN25, 1″ |
Nominal Diameter of Inner Pipe:Maratí
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Ioruais
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz)
Sesoto
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLPTáidsícis00X | Teileagúis | DN10, 3/8″ | Úcránach | Urdu | ASME B31.3 | 00: Vítneamach Xósa
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLPDÚigiúrach00X | DN15, 1/2″ | |||||
| HLPDF02000X | DN20, 3/4″ | |||||
| HLPDF02500X | DN25, 1″ | |||||
| HLPDF03200X | DN32, 1-1/4″ | |||||
| HLPDF04000X | DN40, 1-1/2″ | |||||
| HLPDF05000X | DN50, 2″ | |||||
| HLPDF06500X | DN65, 2-1/2″ | |||||
| HLPDF08000X | DN80, 3″ |
Nominal Diameter of Inner Pipe: Recommended ≤ DN80 or 3″. Or selects the Welded Connection Type (from DN10, 3/8″ to DN500, 20″), Vacuum Bayonet Connection Type with Clamps (from DN10, 3/8″ to DN25, 1″).
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Design Pressure: Recommended ≤ 16 bar. Or selects Welded Connection Type (≤64 bar).
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz)
3.2.3 Welded Connection Type
| Model | Connection Type | Nominal Diameter of Inner Pipe | Design Pressure | Material of Inner Pipe | Standard | Remark |
| HLPDW01000X | Welded Connection Type for Dynamic Vacuum Insulated Piping System | DN10, 3/8″ | 8~64 bar | Stainless Steel 304, 304L, 316, 316L | ASME B31.3 | 00:Design Pressure 08 is 8bar, 16 is 16bar, and 25, 32, 40, 64. .
X: Material of Inner Pipe. A is 304, B is 304L, C is 316, D is 316L, E is other. |
| HLPDW01500X | DN15, 1/2″ | |||||
| HLPDW02000X | DN20, 3/4″ | |||||
| HLPDW02500X | DN25, 1″ | |||||
| HLPDW03200X | DN32, 1-1/4″ | |||||
| HLPDW04000X | DN40, 1-1/2″ | |||||
| HLPDW05000X | DN50, 2″ | |||||
| HLPDW06500X | DN65, 2-1/2″ | |||||
| HLPDW08000X | DN80, 3″ | |||||
| HLPDW10000X | DN100, 4″ | |||||
| HLPDW12500X | DN125, 5″ | |||||
| HLPDW15000X | DN150, 6″ | |||||
| HLPDW20000X | DN200, 8″ | |||||
| HLPDW25000X | DN250, 10″ | |||||
| HLPDW30000X | DN300, 12″ | |||||
| HLPDW35000X | DN350, 14″ | |||||
| HLPDW40000X | DN400, 16″ | |||||
| HLPDW45000X | DN450, 18″ | |||||
| HLPDW50000X | DN500, 20″ |
Nominal Diameter of Outer Pipe: Recommended by the Enterprise Standard of HL Cryogenic Equipment. It also can be produced according to requirement of the customer.
Material of Outer Pipe: Without special requirement, the material of inner pipe and outer pipe will be selected the same.
Power Condition: The site needs to supply power to the vacuum pumps and inform HL Cryogenic Equipment the local electricity information (Voltage and Hertz)We insist on the principle of development of ‘High quality, Efficiency, Sincerity and Down-to-earth working approach’ to provide you with excellent service of processing for 2019 New Style China 4.8kw Electric Beer Juice Nitrogen Tin Can Filling Sealing Line Machine with Long Distance Control System, Our remaining purpose is “To check out the very best, To become the Best”. Make sure you come to feel free to call with us for those who have any necessities.
2019 New Style China Water Filling Machine, Machine, We have been proud to supply our goods to every auto fan all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.
